Tutorials.

For Worldwide: KKE Circuit is available across Global in English. Region: Global (INT).

Tutorial: Design and document a 3-phase motor starter panel

Outcome: A complete project with schematic + power drawing + terminal strip + BOM for an 11 kW DOL motor starter.

Steps

1. New Project → IEC standard.
2. New Drawing → Schematic A3 Landscape.
3. Drop incomer terminal block, MCB Q1, contactor K1, overload F1, motor M1.
4. Wire L1/L2/L3/PE through the chain.
5. Add a control circuit on the right half: Start S1, Stop S2, contactor coil K1, overload aux contact.
6. Add net labels L1, N, +24V, K1-COIL.
7. Run Project → Validate → fix floating nets.
8. Project → BOM → review components.
9. Assign components to panel +CAB1. Project → Terminal Strips → Generate.
10. Drawing → Export → PDF Pro for the package.

Variants of this tutorial: Star-Delta version, Soft-Starter version, VFD version.

Tutorial: Build a complete water-treatment P&ID and BOM

A full water-treatment plant section: feed pump → filter → UV disinfection → storage tank, with level, flow and pressure instrumentation tagged in ISA-5.1. End in BOM.

Tutorial: Document a small PLC-controlled conveyor system end-to-end

Schematic + PLC I/O drawing + sensor connection drawing + terminal strip + panel GA + BOM, all in one project, using the same library parts.

Tutorial: Convert an existing AutoCAD schematic to KKE Circuit

Side-by-side migration walkthrough using the DXF import flow and the bulk DXF symbol import. See "Migrating from AutoCAD Electrical" in Getting Started for the prerequisites.

Tutorial: Set up a project from scratch with custom title block, templates, and team roles

Start with a brand-new organisation: upload logo, define title-block placeholders, create an org template, invite three teammates with different roles, share a project read-only with a client.

Tutorial: From schematic to BOM to Odoo manufacturing order

Connect Odoo, sync products, design the schematic, generate the BOM, push to Odoo as mrp.bom, confirm in Odoo.